Industry: Automobile Location: India, since 2003 We have developed difficult curved layouts for movement of component around the operator or obstacle to reach the desired destination. These types of equipment at suitable for layouts in which machine...

Industry: Automobile Location: India (HP), since 2013 Heavy Foundry Moulds coming from the sand emptying station needed to be conveyed back to the sand filling station. We developed a system that could convey these heavy sand boxes using only gravity power...

Industry: Automobile Location: India (HP), since 2012 Soft Cast Cores on pallets are to be conveyed from one area in the foundry to the location where the cores have to be cast into the moulds. After multiple site visits we identified the constraint of...

Industry: Automobile Location: India (Uttaranchal), since 2007 Front Axle Assembly System: A full length front axle spans almost 6ft and has the housings with end axles to be fitted into them. The process of fitting these axles requires that the housings...

Industry: Automobile Location: India, since 1990s Orientation of the component fed into the subsequent machine is important for the operation. The front leading portion of the component needs to be at the rear end and vice versa. We developed the 180Deg...

Industry: Automobile Location: India, since 2009 For a Large Automobile component, we developed a fixture that could be rotated about its own central axis so as to facilitate indexing and stopping at different orientations. This operation was useful to...

Industry: Automobile Location: India, since 1993 For complete inversion of the components, we have developed systems that rotate the component around its front or centre axis to get the right orientation for the component. The operation can be developed...

Industry: Automobile Location: India (MH, Chennai & Hyd), since 1990s A simple tilting station for the automobile component to allow for the correct orientation as per the machine and operator requirement. We have developed multiple types of tilting...

Industry: Automobile Location: India (MH), since 2008 The component has flanges and heightened edges that are not suitable for conveying. However, we developed a specialized conveyor system using non-powered technology to convey and transfer the components...

Industry: Automobile Location: India (Chennai & MH), since 2006 For the specialized irregular shaped component having low C.G. and low conveying capacity, we developed a conveying and cleaning system that could convey using powered systems. The component...

Industry: Automobile Location: India, since 2002 For the assembly, machining and multiple orientation upending actions of an automobile component, we developed specially designed equipment to hold, convey, tilt, tumble, lift, rotate and feed one at a time...

Industry: Automobile Location: India (MH), since 2001 For irregular shaped component, we were able to develop a conveyor with a special conveying surface that was able to handle the movement of the material from machine to machine without the operator...

Industry: Automobile Location: India (Mumbai, Chennai), since 1998 For Assembling critical bulky components of automobile parts that can be fitted together to attain a close fit. The manner of handling these components with the required orientation is...